MPX® Collection Blockout
Print Solutions for Flat and Smooth Applications
MPX Blockout Matte White is a visual communication product line in white, with a matte finish and a calendered monomeric vinyl face. Suitable for indoor and outdoor applications, it features a permanent pressure-sensitive adhesive and a silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).
Expected Durability After Application
05 Years Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.06 / 1.22 / 1.52m |
| Available Lengths | Imprimax | 50m |
| Liner Weight | Imprimax | 142g/m² |
| Face Film Thickness | Imprimax | 0.09 (90 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 24 to 36 months, provided the recommended storage guidelines listed above are followed.
MPX® Stop Light Line
Print Solutions for Flat and Smooth Applications
MPX Stop Light Matte White
is a product line for visual communication, in White, with a matte finish, featuring a calendered monomeric vinyl face, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).
Expected Durability After Application
05 Years Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.06 / 1.22 / 1.52m |
| Available Lengths | Imprimax | 50m |
| Liner Weight | Imprimax | 142g/m² |
| Face Film Thickness | Imprimax | 0.09 (90 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 24 to 36 months, provided the recommended storage guidelines listed above are followed.
MPX Stop Light Semigloss
is a product line for visual communications, in White, with a semigloss finish, featuring a calendered Monomeric vinyl face film, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).
Expected Durability After Application
05 Years Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.06 / 1.22 / 1.52m |
| Available Lengths | Imprimax | 50m |
| Liner Weight | Imprimax | 142g/m² |
| Face Film Thickness | Imprimax | 0.09 (90 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 24 to 36 months, provided the recommended storage guidelines listed above are followed.
MPX Stop Light Super Gloss White is a product line for visual communications, in white with a high-gloss finish, featuring a calendered monomeric vinyl face film, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).
Expected Durability After Application
05 Years Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.06 / 1.22 / 1.52m |
| Available Lengths | Imprimax | 50m |
| Liner Weight | Imprimax | 142g/m² |
| Face Film Thickness | Imprimax | 0.09 (90 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 24 to 36 months, provided the recommended storage guidelines listed above are followed.
Gold SuperBlackout®
Gold Super Blackout is a line of visual communication products in white, with a semi-gloss finish and a 160-micron (0.16) calendared polymeric vinyl face film. Suitable for indoor and outdoor applications, it has a pressure-sensitive permanent adhesive and a 142 g/m² silicone-coated paper liner.
Product Composition
160-micron (0.16) calendered polymeric PVC face film.
Adhesive: Permanent, pressure-sensitive, water-based acrylic adhesive (non-toxic).
“Protective paper” liner: 142 g/m² silicone-coated coated paper.
Expected Durability After Application
08 Years Outdoor / Indoor (Unprinted)
Main use
Visual communications in general; partial wrapping, surface covering, image coverage and light transmission, smooth, flat or curved surfaces; interior decoration; digital cutting; and more.
Suitable for use with digital inkjet printers using solvent, eco-solvent, UV and latex inks, as well as screen printing.
NOTE: It is essential to allow the solvents in the ink to cure completely to prevent print defects, material rippling, excessive shrinkage, and loss of adhesive properties.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22m |
| Available Lengths | Imprimax | 25m |
| Liner Weight | Imprimax | 142g/m² |
| Face Film Thickness | Imprimax | 0.16 mm (160 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat or curved surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.