Multiprint Semi-Gloss White  is a white product line for visual communications, with a Gloss finish, featuring a calendered Monomeric vinyl face, suitable for indoor and outdoor applications, with a pressure-sensitive permanent adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

2-Year Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Note: It is extremely important to allow the solvents from the ink to cure completely. This helps prevent defects in the printed image, material wrinkling, excessive shrinkage, and loss of adhesive properties.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.

Multiprint Matte White is a product line for visual communications, in white with a matte finish, featuring a calendered monomeric vinyl face stock, suitable for indoor and outdoor applications, with a pressure-sensitive permanent adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

2-Year Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Note: It is extremely important to allow the solvents from the ink to cure completely. This helps prevent defects in the printed image, material wrinkling, excessive shrinkage, and loss of adhesive properties.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.

Multiprint Stop Light
is a product line for visual communications, in White, with a Semi-Gloss finish, featuring a calendered Monomeric vinyl face film, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

2-Year Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 24 to 36 months, provided the recommended storage guidelines listed above are followed.