Jateado Opaco is a line of products for vehicle wraps, featuring a specially developed technology that makes the material easier to apply and handle, allowing small air bubbles to be easily removed during installation on various types of panels or vehicle fleets, for quick and secure application. Available in solid, pearlescent and metallic colors, with a 120-micron calendered polymeric vinyl face. Suitable for indoor and outdoor applications, with a repositionable pressure-sensitive adhesive and a 140 g/m² silicone-coated paper liner.

Product Composition

120-micron (0.12) calendered Gold polymeric PVC face film.

Note: The opacity of the PVC film may vary and should be taken into account when installed.  Adhesive: Repositionable, pressure-sensitive water-based acrylic adhesive (non-toxic).

Liner “protective paper”: 140 g/m² silicone-coated paper

Expected Durability

For horizontal applications, expected durability may be reduced by approximately 20%, depending on the installation technique and maintenance. This expected lifespan may be shorter or longer. Carry out preliminary application tests to assess removability and adhesion on the intended surface.

Technical Specifications

Main use

Visual communications; banners and signage; indoor and outdoor signs; event booths; vehicle graphics (partial customization or full wraps); building facades and backlit displays; panels and displays; point-of-sale customization; boats and jet skis; aircraft; interior décor; wall stickers; and more.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.