MaxLux®
Max Lux is a product line for visual communications, available in a wide range of translucent colors, with a calendered polymeric vinyl face film, suitable for indoor and outdoor applications, featuring a permanent pressure-sensitive acrylic adhesive and a silicone-coated paper liner.
Product Composition
Face Stock: Calendered Polymeric Vinyl
Adhesive: Permanent Pressure-Sensitive Acrylic Adhesive (Non-Toxic).
Liner “protective paper”: Silicone-coated coated paper.
Expected Durability
For horizontal applications, expected durability may be reduced by approximately 20%, depending on the installation technique and how it is maintained; this expected lifespan may be shorter or longer. Carry out application tests beforehand to assess removal performance and adhesion to the intended surface.
| Max Lux | Indoor Durability | Outdoor Durability |
|---|---|---|
| Full Range | 8 years | 8 years |
Technical Specifications
| Max Lux | Face stock | Liner | Dimensions |
|---|---|---|---|
| Full Range | 0.080 mm | 120g/m² | 1,22 x 50 m |
Main use
General visual communications; illuminated panels / backlit displays; glass and clear or translucent sheets; interior decoration, and more.
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.