Imprimax
Jateados®
Frosted
is a product line for decorating and customizing spaces, with a transparent color and frosted finish. It features a calendered monomeric vinyl face film, especially suitable for cold lamination and glass decoration, with a permanent pressure-sensitive adhesive and a silicone-coated paper liner.
Product Composition
Calendared monomeric PVC face film
Adhesive: Permanent, pressure-sensitive, water-based acrylic adhesive (non-toxic).
Liner “protective paper”: Silicone-coated coated paper.
| Product | Light Transmission |
|---|---|
| Transparent Frosted | 92.0% |
| Smoked Frosted | 45.0% |
| Transparent Brushed | 92.0% |
| Gray Linen | 90,0% |
Expected Durability
For horizontal applications, expected durability may be reduced by approximately 20%, depending on the installation technique and maintenance. This expected lifespan may be shorter or longer. Carry out preliminary application tests to assess removability and adhesion on the intended surface.
| Etched | Indoor Durability | Outdoor Durability |
|---|---|---|
| Full Range | 8 years | 5 years |
Technical Specifications
| Etched | Face stock | Liner | Dimensions |
|---|---|---|---|
| Transparent | 0.08 | 120g/m² | 1.00/1.06/1.22/1.40/1.52 x 50 m |
| Smoked | 0.08 | 120g/m² | 1,22 x 50 m |
| Brushed | 0.10 | 120g/m² | 1,22 x 50 m |
| Gray Linen | 0.10 | 120g/m² | 1,22 x 50 m |
Main use
Visual communication in general; interior decoration; cold lamination; glass decoration; among others.
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.