Gold High Gloss®
Gold High Gloss
is a line of vehicle wrapping products featuring technology developed to make application and handling easier. Available in a range of colors, with 90-micron calendered polymeric vinyl face film, recommended for indoor and outdoor applications. Features repositionable pressure-sensitive adhesive and a 130 g/m² siliconized paper liner.
Product Composition
Gold Calendered Polymeric PVC Face, 90 microns (0.09).
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: repositionable, pressure-sensitive water-based acrylic (non-toxic).
Liner “protective paper”: 140 g/m² silicone-coated couche paper.
Expected Durability
For horizontal applications, expected durability may be reduced by approximately 20%, depending on the installation technique and maintenance. This expected lifespan may be shorter or longer. Carry out preliminary application tests to assess removability and adhesion on the intended surface.
| Feature | For Internal Use | Outdoor Use |
|---|---|---|
| Solid Colors | 6 years | 6 years |
| Citrus Colors | 6 years | 4 years |
Technical Specifications
| Description | Method | Specifications |
|---|---|---|
| Black Dimensions | Imprimax | 1.40 x 50m |
| Colored Dimensions | Imprimax | 1.40 x 20m |
| Liner Weight | Imprimax | 140 g/m² |
| Face Film Thickness | Imprimax | 0.090mm |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Main use
Visual communications; banners and signage; indoor and outdoor signs; event booths; vehicle graphics (partial customization or full wraps); building facades and backlit displays; panels and displays; point-of-sale customization; boats and jet skis; aircraft; interior décor; wall stickers; and more.
Recommendations
Apply to a smooth, flat surface that has been cleaned beforehand with isopropyl alcohol to avoid contact with impurities, oils, grease, dust, or any chemicals that may prevent the self-adhesive from adhering;
Install immediately after removing the liner (backing paper) and press the material against the substrate for optimal adhesive performance. Once applied, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a location away from direct sunlight and with the temperature controlled in advance.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
