MPX Matte White
is a product line for visual communications, in white with a matte finish, featuring a calendered monomeric vinyl face film, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communications in general; partial vehicle wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among others.

Suitable for use with digital inkjet printers using solvent, eco-solvent, UV and latex inks, as well as screen printing.

Note: It is extremely important to allow the solvents from the ink to cure completely. This helps prevent defects in the printed image, material wrinkling, excessive shrinkage, and loss of adhesive properties.

Recommendations

Apply to a clean, smooth, flat surface using isopropyl alcohol to prevent contact with contaminants, oil, grease, dust, or any chemicals that may impair the self-adhesive's bond. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesion. Once applied, avoid harsh cleaning products and constant friction. For removal, we recommend peeling the material at a 90° angle in a shaded, climate-controlled area.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.

MPX Semi-Gloss White is a product line for visual communications, in white with a semi-gloss finish, featuring a calendered monomeric vinyl face stock, suitable for indoor and outdoor applications, with a pressure-sensitive permanent adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.

MPX Super Gloss White
is a line of visual communication products in white, with a super-gloss finish and a calendered monomeric vinyl face, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.

MPX Matte Transparent is a product line for visual communication, in Transparent with a matte finish, featuring a calendered monomeric vinyl face film, suitable for indoor and outdoor applications, with a pressure-sensitive permanent adhesive and a siliconized paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.

MPX Transparent Gloss
is a product range for visual communications in transparent, gloss finish, with a calendered monomeric vinyl face, suitable for indoor and outdoor applications. It features a pressure-sensitive permanent adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.

MPX Matte White Blackout
is a visual communication product line in white with a matte finish, featuring a calendered monomeric vinyl face, suitable for indoor and outdoor applications. It has a permanent pressure-sensitive adhesive and a siliconized paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.

MPX Stop Light Matte White
is a product line for visual communication, in White, with a matte finish, featuring a calendered monomeric vinyl face, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 24 to 36 months, provided the recommended storage guidelines listed above are followed.

MPX Stop Light Gloss White is a product line for visual communications, in white with a semi-gloss finish, featuring a calendered monomeric vinyl face film, suitable for indoor and outdoor applications, with permanent pressure-sensitive adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 24 to 36 months, provided the recommended storage guidelines listed above are followed.

MPX Stop Light Super Gloss White is a product line for visual communications, in white with a high-gloss finish, featuring a calendered monomeric vinyl face film, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.

Recommendations

Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 24 to 36 months, provided the recommended storage guidelines listed above are followed.

MPX Removable White Semi-Gloss a white product line for visual communications with a gloss finish and a calendered monomeric vinyl face film, suitable for indoor and outdoor applications. It features a gray removable pressure-sensitive adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Removable gray water-based acrylic pressure-sensitive adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.



NOTE: It is essential to allow the solvents in the ink to cure completely to prevent print defects, material rippling, excessive shrinkage, and loss of adhesive properties.

Recommendations

Apply to a clean, smooth, flat surface using isopropyl alcohol, avoiding contact with contaminants, oil, grease, dust or any chemicals that could impair the adhesive’s bond;

Install immediately after removing the liner (paper) and press the material against the substrate for best adhesive performance; After application, avoid harsh products and constant friction; For removal, we recommend peeling the material at a 90° angle in a place protected from sunlight and in a climate-controlled environment.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.

MPX Removable Matte White a product line for visual communications, in white with a matte finish, featuring a calendered monomeric vinyl face film, suitable for indoor and outdoor applications, with a gray removable pressure-sensitive adhesive and a silicone-coated paper liner.

Product Composition

Note: PVC film opacity may vary and should be taken into account during installation.

Adhesive: Removable gray water-based acrylic pressure-sensitive adhesive (non-toxic).

Expected Durability After Application

05 Years Outdoor / Indoor (Unprinted)

Main use

Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.



NOTE: It is essential to allow the solvents in the ink to cure completely to prevent print defects, material rippling, excessive shrinkage, and loss of adhesive properties.

Recommendations

Apply to a clean, smooth, flat surface using isopropyl alcohol, avoiding contact with contaminants, oil, grease, dust or any chemicals that could impair the adhesive’s bond;

Install immediately after removing the liner (paper) and press the material against the substrate for best adhesive performance; After application, avoid harsh products and constant friction; For removal, we recommend peeling the material at a 90° angle in a place protected from sunlight and in a climate-controlled environment.

Ideal Storage Conditions

The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.

Important:

Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.

As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.