GoldMax High Gloss®
Gold High Gloss is a product line for automotive wrapping, featuring technology developed to make application and handling easier. Available in a variety of colors, with a 90-micron calendered polymeric vinyl face film, suitable for indoor and outdoor applications, with a pressure-sensitive repositionable adhesive and a siliconized paper liner.
Product Composition
Face: Calendered Gold Polymeric PVC
Adhesive: Permanent, pressure-sensitive, water-based acrylic adhesive (non-toxic).
Liner: Silicone-Coated Polyester
Expected Durability
For horizontal applications, expected durability may be reduced by approximately 20%, depending on the installation technique and maintenance. This expected lifespan may be shorter or longer. Carry out preliminary application tests to assess removability and adhesion on the intended surface.
| Gold Max High Gloss | Indoor Durability | Outdoor Durability |
|---|---|---|
| Full Range | 6 years | 6 years |
Technical Specifications
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.40 x 20 m |
| Available Lengths | Imprimax | 20m |
| Liner Weight | Imprimax | 140 g/m² |
| Face Film Thickness | Imprimax | 0.090 mm |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Main use
Visual communication; banners and flags; indoor and outdoor signage; event booths; vehicle fleet graphics (partial customization or full wrapping); building facades and frontlit signs; panels and totems; point-of-sale customization; boats and jet skis; aircraft; interior decor; wall stickers; and more.
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
DigiWall®
Ideal for application on rough surfaces (bricks, roughcast, among others)
DigiWall
is a product range for general visual communications, interior decoration, textured walls, and other complex applications requiring conformability. It features a 65-micron calendered polymeric vinyl face, suitable for a range of applications, with a super-permanent pressure-sensitive adhesive specially formulated for irregular and corrugated surfaces, and a 130 g/m² silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Repositionable, Pressure-Sensitive Water-Based Acrylic Adhesive (Non-Toxic).
Expected Durability After Application
2-Year Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22m |
| Available Lengths | Imprimax | 50m |
| Liner Weight | Imprimax | 145 g/m² |
| Face Film Thickness | Imprimax | 0.65 (65 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
DigiGold® (High Performance)
For complex applications requiring greater conformability
DigiGold High Performance White is a product line for visual communications, featuring a 65-micron calendered polymeric vinyl face, suitable for indoor and outdoor applications on smooth surfaces, bumpers and other complex applications requiring conformability, with a pressure-sensitive permanent adhesive and a 130 g/m² silicone-coated paper liner
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Repositionable, Pressure-Sensitive Water-Based Acrylic Adhesive (Non-Toxic).
Expected Durability After Application
08 Years Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22/1.52 x 50 m |
| Available Lengths | Imprimax | 50m |
| Liner Weight | Imprimax | 130g/m² |
| Face Film Thickness | Imprimax | 0.65 (65 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
As of 02/05/2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the ideal storage recommendations listed above are followed.
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
DigiGold High Performance Matte Transparent
is a product line for visual communication, featuring a 65-micron calendered polymeric vinyl face, suitable for indoor and outdoor applications on smooth surfaces, bumpers, and other complex surfaces requiring conformability. It has a permanent pressure-sensitive adhesive and a 130g/m² siliconized paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Repositionable, Pressure-Sensitive Water-Based Acrylic Adhesive (Non-Toxic).
Expected Durability After Application
05 Years Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22 / 1.50m |
| Available Lengths | Imprimax | 50m |
| Liner Weight | Imprimax | 130g/m² |
| Face Film Thickness | Imprimax | 0.65 (65 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
Digigold High Performance Transparent Gloss is a product line for visual communications, featuring a 65-micron calendered polymeric vinyl face, suitable for indoor and outdoor applications on smooth surfaces, bumpers, and other complex applications requiring conformability, with a permanent pressure-sensitive adhesive and a 130 g/m² silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Repositionable, Pressure-Sensitive Water-Based Acrylic Adhesive (Non-Toxic).
Expected Durability After Application
05 Years Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22 / 1.50m |
| Available Lengths | Imprimax | 50m |
| Liner Weight | Imprimax | 130g/m² |
| Face Film Thickness | Imprimax | 0.65 (65 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
RevestWall®
Textured vinyls to give interiors a unique look
RevestWall - Artistic is a product line for decoration, featuring special textures, a 140-micron calendered polymeric vinyl face film, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a 120 g/m² silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Repositionable, Pressure-Sensitive Water-Based Acrylic Adhesive (Non-Toxic).
Expected Durability After Application
08 Years Outdoor / Indoor (Unprinted)
Primary Use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22m |
| Available Lengths | Imprimax | 25m |
| Liner Weight | Imprimax | 120g/m² |
| Face Film Thickness | Imprimax | 0.14 (140 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
RevestWall - Canvas is a decorative product line featuring special textures, a 140-micron calendered polymeric vinyl face, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a 120 g/m² silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Repositionable, Pressure-Sensitive Water-Based Acrylic Adhesive (Non-Toxic).
Expected Durability After Application
08 Years Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22m |
| Available Lengths | Imprimax | 25m |
| Liner Weight | Imprimax | 120g/m² |
| Face Film Thickness | Imprimax | 0.14 (140 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
Revest Wall
Telado
is a line of decorative products featuring special textures and a 160-micron calendered polymeric vinyl face film, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a 120 g/m² silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Repositionable, Pressure-Sensitive Water-Based Acrylic Adhesive (Non-Toxic).
Expected Durability After Application
08 Years Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22m |
| Available Lengths | Imprimax | 25m |
| Liner Weight | Imprimax | 120g/m² |
| Face Film Thickness | Imprimax | 0.160 mm |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
RevestWall - Volpe is a product line for decoration, featuring special textures and a 140-micron calendered polymeric vinyl face film, suitable for indoor and outdoor applications, with a permanent pressure-sensitive adhesive and a 120 g/m² silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Repositionable, Pressure-Sensitive Water-Based Acrylic Adhesive (Non-Toxic).
Expected Durability After Application
08 Years Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22m |
| Available Lengths | Imprimax | 25m |
| Liner Weight | Imprimax | 120g/m² |
| Face Film Thickness | Imprimax | 0.14 (140 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important: As of 02/05/2023, Imprimax has made improvements to its manufacturing process, extending the product’s shelf life from 12 to 24 months, provided it is stored according to the recommendations above.
Gold SuperBlackout®
Gold Super Blackout is a line of visual communication products in white, with a semi-gloss finish and a 160-micron (0.16) calendared polymeric vinyl face film. Suitable for indoor and outdoor applications, it has a pressure-sensitive permanent adhesive and a 142 g/m² silicone-coated paper liner.
Product Composition
160-micron (0.16) calendered polymeric PVC face film.
Adhesive: Permanent, pressure-sensitive, water-based acrylic adhesive (non-toxic).
“Protective paper” liner: 142 g/m² silicone-coated coated paper.
Expected Durability After Application
08 Years Outdoor / Indoor (Unprinted)
Main use
Visual communications in general; partial wrapping, surface covering, image coverage and light transmission, smooth, flat or curved surfaces; interior decoration; digital cutting; and more.
Suitable for use with digital inkjet printers using solvent, eco-solvent, UV and latex inks, as well as screen printing.
NOTE: It is essential to allow the solvents in the ink to cure completely to prevent print defects, material rippling, excessive shrinkage, and loss of adhesive properties.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22m |
| Available Lengths | Imprimax | 25m |
| Liner Weight | Imprimax | 120 g/m² |
| Face Film Thickness | Imprimax | 0.16 mm (160 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat or curved surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.