PisoMax®
Pisomax
is a product line for decorating and personalizing spaces, featuring a calendered polymeric vinyl face film, suitable for a range of applications, with a permanent pressure-sensitive adhesive and a silicone-coated paper liner.
Product Composition
Face Stock: Calendered Polymeric Vinyl
Adhesive: Permanent Super Tack Pressure-Sensitive Acrylic Adhesive (Non-Toxic).
Expected Durability
For horizontal applications, expected durability may be reduced by approximately 20%, depending on the installation technique and maintenance. This expected lifespan may be shorter or longer. Carry out preliminary application tests to assess removability and adhesion on the intended surface.
| PisoMax | Indoor Durability | Outdoor Durability |
|---|---|---|
| Transparent | 2 years | 2 years |
| Anti-Slip | 2 years | 2 years |
Technical Specifications
| PisoMax | Face stock | Liner | Dimensions |
|---|---|---|---|
| Transparent | 0.120 mm | 120g/m² | 1.00 / 1.22 / 1.52 x 50 m |
| Anti-Slip | Face stock | Liner | Dimensions |
|---|---|---|---|
| White | 0.200 mm | 120g/m² | 1.52 X 25m |
| Transparent | 0.200 mm | 120g/m² | 1.52 X 25m |
| Black | 0.200 mm | 120g/m² | 1.22 / 1.52 X 25m |
Main use
Flat surfaces on stairs; ramps; hallways and elevators; emergency exits; wayfinding (floor) signage; maintenance areas; department stores; hotels, banks, restaurants, dealerships, and more.
Recommendations
Apply to a clean, smooth, flat surface using isopropyl alcohol to prevent contact with contaminants, oil, grease, dust or any chemicals that may affect the adhesive's bonding; Install immediately after removing the liner (paper) and press the material against the substrate for optimal adhesive performance; After application, avoid harsh products and constant friction; For removal, we recommend peeling the material off at a 90° angle in a location away from direct sunlight and with a controlled temperature. For applications in damp areas (shower enclosures, powder rooms, sinks or similar), we recommend applying a sealant, such as silicone caulk, along the edges of the product.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.