ReverseMax®
Adhesive layer positioned over the texture for application to the inside of the surface, protecting the decoration. Adheres to any transparent substrate, such as glass, acrylic and polycarbonate.
Reverse Max is a product line for decorating and customizing spaces, featuring a calendered polymeric vinyl face film, especially suitable for cold lamination and glass decoration, with a pressure-sensitive permanent adhesive and a silicone-coated polyester liner.
Product Composition
Face: Calendered Polymeric PVC
Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).
Expected Durability After Application
For horizontal applications, expected durability may be reduced by approximately 20%, depending on the installation technique and maintenance. This expected lifespan may be shorter or longer. Carry out preliminary application tests to assess removability and adhesion on the intended surface.
| Product | Indoor Durability | Outdoor Durability |
|---|---|---|
| Full Range | 8 years | 5 years |
Technical Specifications
| Reverse Max | Face stock | Liner | Dimensions |
|---|---|---|---|
| Full Range | 0.16/0.08 mm | 50g/m² | 1.22 x 25 m |
Main use
Visual communication in general; interior decoration; cold lamination; glass decoration; among others.
Recommendations
Apply to a clean, smooth, flat surface using isopropyl alcohol to prevent contact with contaminants, oil, grease, dust or any chemicals that may affect the adhesive's bonding; Install immediately after removing the liner (polyester) and press the material against the substrate for optimal adhesive performance; After application, avoid harsh products and constant friction; For removal, we recommend peeling the material off at a 90° angle in a location away from direct sunlight and with a controlled temperature.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
