DigiWall®
Ideal for application on rough surfaces (bricks, roughcast, among others)
DigiWall
is a product range for general visual communications, interior decoration, textured walls, and other complex applications requiring conformability. It features a 65-micron calendered polymeric vinyl face, suitable for a range of applications, with a super-permanent pressure-sensitive adhesive specially formulated for irregular and corrugated surfaces, and a 130 g/m² silicone-coated paper liner.
Product Composition
Note: PVC film opacity may vary and should be taken into account during installation.
Adhesive: Repositionable, Pressure-Sensitive Water-Based Acrylic Adhesive (Non-Toxic).
Expected Durability After Application
2-Year Outdoor / Indoor (Unprinted)
Main use
Visual communication in general; partial wrapping, covering smooth, flat surfaces; interior decoration; electronic cutting; among other uses. Suitable for use with digital inkjet printers using solvent, eco-solvent, UV or latex inks, and screen printing.
| Features | Method | Specifications |
|---|---|---|
| Available Widths | Imprimax | 1.22m |
| Available Lengths | Imprimax | 50m |
| Liner Weight | Imprimax | 145 g/m² |
| Face Film Thickness | Imprimax | 0.65 (65 microns) |
| Flame Spread | NBR13434-3 | Fire-retardant |
| Mold Resistance | Imprimax | Excellent |
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
