GoldMax High Gloss®
Gold Max High Gloss is a visual communications product line available in a range of high-gloss colors. It features a premium 80-micron calendared polymeric vinyl face, is suitable for indoor and outdoor applications, and has a permanent pressure-sensitive adhesive with a 110 g/m² silicone-coated polyester liner. A protective surface film helps prevent marks and scratches from squeegees and handling.
Product Composition
Face: Calendered Gold Polymeric PVC
Adhesive: Permanent, pressure-sensitive, water-based acrylic adhesive (non-toxic).
Liner: Silicone-Coated Polyester
Expected Durability
For horizontal applications, expected durability may be reduced by approximately 20%, depending on the installation technique and maintenance. This expected lifespan may be shorter or longer. Carry out preliminary application tests to assess removability and adhesion on the intended surface.
| Gold Max High Gloss | Indoor Durability | Outdoor Durability |
|---|---|---|
| Full Range | 8 years | 8 years |
Technical Specifications
| Gold Max High Gloss | Face stock | Liner | Dimensions |
|---|---|---|---|
| Full Range | 0.080 mm | 110g/m² Polyester. | 1.22 x 20m |
| * Black Piano | 0.080 mm | 110g/m² Polyester. | 1.40 x 20m |
| * Old Champagne | 0.080 mm | 110g/m² Polyester. | 1.40 x 20m |
| * Aluminum Silver | 0.080 mm | 110g/m² Polyester. | 1.40 x 20m |
| * Blood Red | 0.080 mm | 110g/m² Polyester. | 1.40 x 20m |
| * Metallic Red | 0.080 mm | 110g/m² Polyester. | 1.40 x 20m |
Main use
Visual communication; banners and flags; indoor and outdoor signage; event booths; vehicle fleet graphics (partial customization or full wrapping); building facades and frontlit signs; panels and totems; point-of-sale customization; boats and jet skis; aircraft; interior decor; wall stickers; and more.
Recommendations
Apply to a smooth, flat surface that has been cleaned with isopropyl alcohol to prevent contact with contaminants, oils, grease, dust, or any chemicals that may inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for optimal adhesive performance. After application, avoid harsh products and constant friction. To remove, peel the material back at a 90° angle in a climate-controlled location away from direct sunlight.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.