PisoMax® Decorative
Piso Max Decorative is a decorative product line available in a variety of colors, featuring a calendered polymeric vinyl face, suitable for indoor and outdoor applications, with a pressure-sensitive permanent adhesive and silicone-coated paper liner, resistant to household cleaning products.
Product Composition
Face film: Calendered Gold Polymeric PVC
Adhesive: Permanent, pressure-sensitive aqueous acrylic adhesive (non-toxic).
Expected Durability After Application
For horizontal applications, expected durability may be reduced by approximately 20%, depending on the installation technique and maintenance. This expected lifespan may be shorter or longer. Carry out preliminary application tests to assess removability and adhesion on the intended surface.
| Product | Indoor Durability | Outdoor Durability |
|---|---|---|
| Max Decorative Floor | 8 years | 5 years |
Technical Specifications
| Max Decorative Floor | Face stock | Liner | Dimensions |
|---|---|---|---|
| Full Range | 0.250 mm | 120g/m² | 1.22 x 25 m |
Main use
Visual communications in general; interior decoration; wall, ceiling, door, appliance and furniture coverings; interior and exterior boat decoration; vehicle panel details; façades; wall stickers; among others.
Recommendations
Apply to a smooth, flat surface that has been cleaned beforehand with isopropyl alcohol, avoiding contact with impurities, oil, grease, dust or any chemicals that could inhibit adhesion. Install immediately after removing the liner (paper), and press the material against the substrate for the best adhesive performance. After application, avoid harsh products and constant friction. For removal, we recommend peeling the material back at a 90° angle in a climate-controlled area away from direct sunlight. For application in damp areas (shower enclosures, powder rooms, sinks or other areas), we recommend applying a sealing material, such as silicone sealant, along the product edges.
Ideal Storage Conditions
The product must be stored in its original packaging in an environment with a maximum temperature of 30°C and relative humidity of up to 70%, away from sunlight and moisture.
Important:
Starting May 2, 2023, Imprimax introduced improvements to its manufacturing process, extending the product's shelf life from 12 to 24 months, provided the recommended storage guidelines listed above are followed.
As of January 26, 2024, Imprimax introduced improvements to its manufacturing process, extending the product’s shelf life from 24 to 36 months, provided the ideal storage recommendations mentioned above are followed.
